Any Climate.  Any Paint.

Any Climate.

• Optimized performance in climates varying from hot and humid to clean and dry
• Three air caps developed using advanced fluid dynamics technology for excellent atomization
• Packaged as a solution with multiple components allowing the painter to adapt to changing environments

Any Paint.

• Excellent for solvent-based coatings and a must for waterborne
• Fully protected outside and inside for high corrosion
  resistance — gun coating has non-stick properties

• High transfer efficiency for material savings

   

  
  
   

Brochure

Service Bulletin

EPA Approval Letter

Press Release

TEKNA Pro and ProLite gravity feed spray guns with either TE10 or TE20 air cap complies with regulations for application of color coatings and clear coatings in the following areas. TEKNA Pro and TEKNA ProLite gravity feed spray guns with either theTE10 or TE20 air cap is also compliant in all areas not requiring HVLP.  The TEKNA Pro and TEKNA Pro-Lite gravity spray gun must be used with a DeVilbiss® spray gun mounted air adjusting valve with a DeVilbiss 100 psig (full scale) mechanical gauge with markings every 2 psig or a DeVilbiss 160 psig (full scale) digital pressure gauge that measures in 1 psig increments. This air adjusting valve and gauge shall be maintained in good working order. The maximum inlet pressure to the gun shall be 35 PSI when using the TE10 air cap or 26 PSI when using the TE20 air cap as measured with the supplied air adjusting valve and gauge.  Approvals to be added as they come in.